Services
The institute offers conducting analysis in the following
areas:
1) chemical analysis (including
analysis of microquantities of admixtures);
Laboratory
of Electrodeposition of Metals
Laboratory
of Plasma Processes
Laboratory
of Spectral Investigations
2) X-ray phase analysis (analysis
of phase composites);
Laboratory
of Spectral Investigations
Laboratory of Dispersed
Systems
3) determination of
electrokinetic potential, size and size distribution particles
Laboratory of High-Temperature Synthesis
4) determination of qualitative
indices of coatings and metal articles
Laboratory
of Electrodeposition of Metals
5) thermal analysis (up to 1000
oC)
Laboratory
of Spectral Investigations
6) determination of metal
corrosion rate, effectiveness of corrosion inhibitors and their
action mechanism in various media
Laboratory
of High-Temperature Corrosion
The institute performs
contractual investigations on development of
new technologies and materials. Partners interested in
collaborative work in these in similar areas are also
searched.
1.
Nanosized powders of
refractory compounds
(nitrides, oxides, carbides, metals) and their homogeneous
composites for modification of structures of metals, polymers and coatings, for manufacture of
high-temperature materials and cutting instruments, functional
materials, J.Grabis
2. New
technologies and equipment for recovery of chromium, nickel and
copper from diluted
solutions, J.Līcis
3. Corrosion
inhibitors and their compositions for use in hot-water
heating systems and cooling
systems functioning with water or water- ethylene glycol solutions, H.Krasts
4. Electro- and chemicall deposition
coatings of the metal
(Sn, Au, Ni-B, Fe-Ni, Co-W, Cu) and composite (metal-inorganic compound) for modification
of materials, I.Vītiņa
5.
Chemical, physicochemical and physical testing for metal coatings,
metals, metal articles and electrolytes, I.Vītiņa
6. Ceramic
specimens with high ionic conductivity (measurements of
electrophysical properties
are carried out in the Vilnius University) which can be applied as
gas sensors or in lithium ion
batteries, A.Dindune
7. Procedures for synthesis of phosphates - highly
dispersed and granulated hydroxyapatite for bioceramics,
polyphosphates (trace – element fertilizers of delayed action), dicalcium phosphate
(a component of tooth - pastes), phosphate glass (water softening agent), A.Dindune
8.
Selective methods for
determination of micro-quantities of heavy metals, D.Zaruma
9. Reagents for the purification of salts from trace amounts of heavy
metals; the technology of preparation of these reagents, D.Zaruma
10.
Spray-drying granulation of nanosized powders for advanced ceramics
processing, Ē.Palčevskis
11.
Surface modification of nanosized powders and preparation of high
loaded suspensions for ceramics processing, Ē.Palčevskis, L.Čera
12.
Method for increasing the crop and quality of the flax-straw and linseed, R.Belousova
13.
Additives of
fireproofing
compounds to the
plastics, lacquers, dyes and cellulose, R.Belousova
14.
Methods for protection of natural stone materials and building
materials, I.Zariņa
15. The
prescriptions and regimes for stabilization of rust on the
steel constructions, O.Kukurs
16. The
prescriptions and regimes for
reprocessing of ceramic, refractory material, glass and granite chips and wastes into the new building materials, harmless for environment, O.Kukurs
Equipment
Specialized equipment is available for utilization.
1. The high-temperature plasma discharge
equipment ВЧИ-65/5.28, ВЧИ-60/1.76
2. The sputtering equipment
УВНИЛА/1-001
3. The equipment for
determination of specific surface area (on the basis of gas
chromatograph Chrom-3)
4. X-ray diffractometers ДPOH-3,
ДPOH-2
5. Electron microscopes
ЭМВ-100Б, МРЭМ-100-005, РЭМН-2
6. Derivatographs Q-1000
7. IR spectrometers Specord-80
etc.
8. Gas chromatograph Chrom-5
9. Atom absorption spectrometers
AAS-1, AAS-1N, Perkin-Elmer 503
10. Atom emission spectrograph
LMA-1
11. The equipment “Zetamaster”
for determination of the surface charge and particle distribution
12. Automatic gas analyzer
AH-7560.1 for determination of carbon content
13. Optical microscope МБИ-15-2
(МОМО)
14. Metallographic microscope
“Neophot-2”
15. Potentiostats ПИ-50-1.1 with
recorder ПДA-1
16. Testing units for corrosion
experiments in the static and dynamic conditions.
|