1)
chemical analysis (including analysis of microquantities of admixtures);
Laboratory
of Electrodeposition of Metals
Laboratory
of Plasma Processes
Laboratory
of Spectral Investigations
2)
X-ray phase analysis (analysis of phase composites);
Laboratory
of Spectral Investigations
Laboratory
of Dispersed Systems
3)
determination of electrokinetic potential, size and size
distribution particles
Laboratory
of High-Temperature Synthesis
4)
determination of qualitative indices of coatings and metal articles
Laboratory
of Electrodeposition of Metals
5)
thermal analysis (up to 1000 oC)
Laboratory
of Spectral Investigations
6)
determination of metal corrosion rate, effectiveness of corrosion
inhibitors and their action mechanism in various media
Laboratory
of High-Temperature Corrosion
1.
Nanosized powders of
refractory compounds
(nitrides, oxides, carbides, metals)
and their homogeneous
composites for
modification of
structures of metals, polymers and
coatings, for manufacture
of high-temperature materials and cutting instruments, functional
materials, J.Grabis
2.
New technologies and equipment for recovery of chromium, nickel and
copper from diluted solutions, J.Līcis
3.
Corrosion inhibitors and
their compositions for
use in hot-water heating systems and cooling
systems functioning with water or water- ethylene glycol solutions,
H.Krasts
4.
Electro- and chemicall
deposition coatings of the
metal (Sn, Au, Ni-B, Fe-Ni, Co-W, Cu) and composite (metal-inorganic
compound) for modification of materials, I.Vītiņa
5. Chemical,
physicochemical and physical testing for metal coatings, metals, metal
articles and electrolytes, I.Vītiņa
6.
Ceramic specimens with high ionic conductivity (measurements of
electrophysical properties are
carried out in the Vilnius University) which can be applied as gas sensors
or in lithium ion batteries,
A.Dindune
7.
Procedures for
synthesis of
phosphates -
highly dispersed and
granulated hydroxyapatite
for bioceramics, polyphosphates (trace – element fertilizers of delayed action),
dicalcium phosphate (a component of tooth - pastes),
phosphate glass (water
softening agent), A.Dindune
8. Selective
methods for determination of micro-quantities of heavy metals,
D.Zaruma
9.
Reagents for
the purification of salts
from trace amounts of heavy metals; the technology of preparation
of these reagents, D.Zaruma
10. Spray-drying
granulation of nanosized powders for advanced ceramics processing, Ē.Palčevskis
11. Surface
modification of nanosized powders and preparation of high loaded
suspensions for ceramics processing, Ē.Palčevskis,
L.Čera
12. Method
for increasing the crop and quality of the
flax-straw and
linseed,
R.Belousova
13. Additives
of fireproofing compounds to the
plastics, lacquers, dyes and cellulose,
R.Belousova
14. Methods
for protection of natural stone materials and building materials,
I.Zariņa
15.
The prescriptions and regimes
for stabilization of
rust on the steel constructions, O.Kukurs
16.
The prescriptions and regimes for
reprocessing of ceramic, refractory material, glass and granite
chips and wastes
into the new building
materials, harmless
for environment,
O.Kukurs
1.
The high-temperature plasma discharge equipment ВЧИ-65/5.28,
ВЧИ-60/1.76
2.
The sputtering equipment УВНИЛА/1-001
3.
The equipment for determination of specific surface area (on the basis of
gas chromatograph Chrom-3)
4.
X-ray diffractometers ДPOH-3,
ДPOH-2
5.
Electron microscopes ЭМВ-100Б,
МРЭМ-100-005,
РЭМН-2
6.
Derivatographs Q-1000
7.
IR spectrometers Specord-80 etc.
8.
Gas chromatograph Chrom-5
9.
Atom absorption spectrometers AAS-1, AAS-1N, Perkin-Elmer 503
10.
Atom emission spectrograph LMA-1
11.
The equipment “Zetamaster” for determination of the surface charge and
particle distribution
12.
Automatic gas analyzer AH-7560.1
for determination of carbon content
13.
Optical microscope МБИ-15-2
(МОМО)
14.
Metallographic microscope “Neophot-2”
15.
Potentiostats ПИ-50-1.1
with recorder ПДA-1
16.
Testing units for corrosion experiments in the static and dynamic
conditions.
